HOW TO connect two pc’s directly September 15, 2008
Posted by mahendragr in Uncategorized.trackback
To connect two PC’s directly, i.e without any router/switch/modem, u need to have a CROSS-OVER cable..which looks pretty much like your ethernet cable but the difference is in the wiring pattern used.
To make ur own cross-over cable u need
1.A pair of RJ-45 connectors
2.Normal twisted pair cable of suitable length (one which is used in normal ethernet cables)
3.crimping tool
These are the color codes for cross-over cable
1.orange-white
2.oranage
3.green-white
4.blue
5.blue-white
6.green
7.brown-white
8.brown
put all these wires (in sequence) from left to right holding the connector upright..place them properly and use a crimper to bind these wires with the RJ-45 connector..
Now, u’ve a cross-over cable ready..
all u need to do now is connect ur pc’s LAN/NIC cards with this cable
and give an IP address to each of them
ex: 192.168.1.10 and 192.168.1.3
make sure that subnet masks of both the PC’s reamain same (typically 255.255.255.0)…..



I would say, go to a computer store near you and buy a PC-PC cable. Job done for 30 bucks
how to connect two computers using cross cable with openSUSE environment
@ Vaishali
1. Connect the cross cable and assign IPs
2. Install ssh server
3. open terminal — ssh username@IP
4. Accept the RSA key and enter the password
5. This will lead you to a remote terminal
6. You can also use ssh in Nautilus (gnome) or fish in dolphin(kde)
how do i connect a windows server2003 pc to a windows xp laptop? can i still use crossover cable? what else do i need to configure?
Yes u can use a crossover cable…no need for any extra configuration
thanks so much!!!
[...] [...]
hello sir i am ad please infrm to me i connect the 2 pc but no use the cable/hub/router only available in pc to internet so please inform to
aadityaa…i didnt get ur question!!